- |
- Products
- |
- Universal Temperature Control Units
- |
- TT-168 E / TT-168 H
Metric
Control system with high functionalityTT-168 E & TT-168 H
Moulds up to 1'200 kg
Summary
- Maximum temperature 90°C medium water
- Maximum temperature 150°C medium oil
- Heating capacity 12 kW water
- Heating capacity 6 kW oil
- Cooling capacity 45 kW @ 90°C
- Cooling system indirect
- Typ E: Pump capacity 60 l/min; max. 4.0 bar
- Typ H: Pump capacity 60 l/min; max. 7.0 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C to °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Pressure display
- Automatic or manual refill
- Time limited water refill
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possilble
Construction
- Submersible sealless pump made from bronze
- Limescale free heat exchanger
- Corrosion resistant device for a long service life
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-168 E I H - 12 kW | ||||
|---|---|---|---|---|---|
| Temperature range | |||||
| Water | °C | 90 | |||
| Oil | °C | 150 | |||
| Heat transfer medium | water/oil | ||||
| Filling amount max. | l | 20 | |||
| Heating capacity | |||||
| Water | kW | 12 | |||
| Oil | kW | 6 | |||
| Cooling system | indirect | ||||
| tubular heat exchanger | kW | 45 | |||
| At flow temperature | °C | 90 | |||
| Pump system see diagram | |||||
| Typ E: 60 l/min; max. 4.0 bar; motor 0.75 kW | ⚫ | ||||
| Typ H: 60 l/min; max. 7.0 bar; motor 1.50 kW | ⚫ | ||||
| Suction capacity vakuum | mWS | 8 | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | 1/2" BS | ||||
| Cooling water | 3/8" BS | ||||
| Dimensions incl. castors, LxWxH | mm | 710x325x785 | |||
| Weightempty approx. | kg | 67 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Mould drain | ⚫ | ||||
| Temperature control at the consumer | ⚫ | ||||
| Time limited water refill | ⚫ | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
| Pressure regulation | - | ||||
Imperial
Control system with high functionalityTT-168 E & TT-168 H
Moulds up to 2'645 lbs
Summary
- Maximum temperature 194°F medium water
- Maximum temperature 302°F medium oil
- Heating capacity 40‘946 BTU/hr water
- Heating capacity 20‘473 BTU/hr oil
- Cooling capacity 45 kW @ 194°F
- Cooling system indirect
- Typ E: Pump capacity 16 gpm; max. 58 psi
- Typ H: Pump capacity 16 gpm; max. 102 psi
Functions
- Self-optimizing temperature controller with temperature display
1/10°F – steps - Display in °C to °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Pressure display
- Automatic or manual refill
- Time limited water refill
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possilble
Construction
- Submersible sealless pump made from bronze
- Limescale free heat exchanger
- Corrosion resistant device for a long service life
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-168 E I H - 12 kW | ||||
|---|---|---|---|---|---|
| Temperature range | |||||
| Water | °F | 194 | |||
| Oil | °F | 302 | |||
| Heat transfer medium | water/oil | ||||
| Filling amount max. | gal. | 5.3 | |||
| Heating capacity | |||||
| Water | BTU/hr | 40'946 | |||
| Oil | BTU/hr | 20'473 | |||
| Cooling system | indirect | ||||
| tubular heat exchanger | kW | 45 | |||
| At flow temperature | °F | 194 | |||
| Pump system see diagram | |||||
| Typ E: 16 gpm; max. 58 psi; motor 1 HP | ⚫ | ||||
| Typ H: 16 gpm; max. 102 psi; motor 2 HP | ⚫ | ||||
| Suction capacity vakuum | inHg | 23.17 | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | 1/2" NPT | ||||
| Cooling water | 3/8" NPT | ||||
| Dimensions incl. castors, LxWxH | inch | 28×12.8×30.9 | |||
| Weightempty approx. | lbs | 148 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Mould drain | ⚫ | ||||
| Temperature control at the consumer | ⚫ | ||||
| Time limited water refill | ⚫ | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
| Pressure regulation | - | ||||