Metric

Icon Unit Oil

Powerful, small deviceTT-248

Moulds up to 600 kg

Summary

  • Maximum temperature 200°C
  • Medium oil
  • Heating capacity 8 kW
  • Cooling capacity 20 kW @ 200°C
  • Cooling system indirect
  • Pump capacity with axial face sealed 100 l/min; max. 5.5 bar
  • With magnetic drive 100 l/min; max. 5.5 bar

Functions

  • Self-optimizing temperature controller with temperature display
    1/10°C – steps
  • Display in °C to or °F and l/min or gal/min
  • Digital flow display and monitoring
  • Automatic temperature control
  • Switchover for temperature control on the mould
  • Pressure display
  • Automatic mould drainage
  • Leakstopper device – operation in pressure and vacuum mode possible

Construction

  • High temperature pump with mechanical seal
  • Hot oil circuit with bypass which ensures the internal oil circulation when the valves are closed
  • Limescale free heat exchanger
  • No cracking of the oil thanks to special heating construction
  • Expansion tank with drip pan
  • Unit on castors

Safety features

  • Level control for dry run protection
  • Electronic temperature limitation and monitoring in the controller
  • Mechanical safety thermostats
  • Visual and acoustic fault indications
  • Integrated circuit breakers
  • Main switch, transformer and motor protection switch

Cooling capacity

Pump capacity

Product informationsTT-248

ProductTT-248
Temperature range°C200
Heat transfer mediumoil
   Filling amountl8
   Expansion volumel6
Heating capacitykW8
Cooling systemindirect
   Tubular heat exchangerkW20
   Plate heat exchangerkW
   At flow temperature°C200
Pump
   MotorkW1.8
Pump system see diagram
   Typ Z: axial face sealed 100 l/min; max. 5.5 bar
   Typ A: magnetic drive 100 l/min; max. 5.5 bar
   Typ X: 260 l/min; max. 4.0 bar
   Typ Y: 200-500 l/min; max. 4.0 bar
   Suction capacity vakuummWS8
ControllerMP-888
   Measurement sensorFeKo Typ J
Connections
   Medium3/4" BS
   Cooling water outlet1/2" BS
   Cooling water inlet1/2" BS
   Water-glycol-
   Compressed air min.bar-
Dimensions incl. castors, LxWxHmm880x360x920
Weight empty approx.kg120
Coloursilvergrey RAL 7001
 
Functions● standard/ ○ optional / - not possible
Flow control
Leakstopper device
Mould drain
Temperature regulation at the consumer
Interface controller-
Level control
Visual fault indications
Acoustic warning
Pressure regulation-
Double circuit version-

Imperial

Icon Unit Oil

Powerful, small deviceTT-248

Moulds up to 1‘322 lbs

Summary

  • Maximum temperature 392°F
  • Medium oil
  • Heating capacity 27‘297 BTU/hr
  • Cooling capacity 20 kW @ 392°F
  • Cooling system indirect
  • Pump capacity with axial face sealed 26.4 gpm; max. 80 psi
  • With magnetic drive 26.4 gpm; max. 80 psi

Functions

  • Self-optimizing temperature controller with temperature display
    1/10°F – steps
  • Display in °C to or °F and l/min or gal/min
  • Digital flow display and monitoring
  • Automatic temperature control
  • Switchover for temperature control on the mould
  • Pressure display
  • Automatic mould drainage
  • Leakstopper device – operation in pressure and vacuum mode possible

Construction

  • High temperature pump with mechanical seal
  • Hot oil circuit with bypass which ensures the internal oil circulation when the valves are closed
  • Limescale free heat exchanger
  • No cracking of the oil thanks to special heating construction
  • Expansion tank with drip pan
  • Unit on castors

Safety features

  • Level control for dry run protection
  • Electronic temperature limitation and monitoring in the controller
  • Mechanical safety thermostats
  • Visual and acoustic fault indications
  • Integrated circuit breakers
  • Main switch, transformer and motor protection switch

Cooling capacity

Pump capacity

Product informationsTT-248

ProductTT-248
Temperature range°F392
Heat transfer mediumoil
   Filling amountUS gal2.1
   Expansion volumeUS gal1.6
Heating capacityBTU/hr27'297
Cooling systemindirect
   Tubular heat exchangerkW20
   Plate heat exchangerkW
   At flow temperature°F392
Pump
   MotorHP2.4
Pump system see diagram
   Typ Z: axial face sealed 26.4 gpm; max. 80 psi
   Typ A: magnetic drive 26.4 gpm; max. 80 psi
   Typ X: 69 gpm; max. 58 psi
   Typ Y: 53-132 gpm; max. 58 psi
   Suction capacity vakuuminHg23.17
ControllerMP-888
   Measurement sensorFeKo Typ J
Connections
   Medium3/4" NPT
   Cooling water outlet1/2" NPT
   Cooling water inlet1/2" NPT
   Water-glycol-
   Compressed air min.psi-
Dimensions incl. castors, LxWxHinch34.6x14.2x36.2
Weight empty approx.lbs265
Coloursilvergrey RAL 7001
 
Functions● standard/ ○ optional / - not possible
Flow control
Leakstopper device
Mould drain
Temperature regulation at the consumer
Interface controller-
Level control
Visual fault indications
Acoustic warning
Pressure regulation-
Double circuit version-