- |
- Products
- |
- Oil Temperature Control Units
- |
- TT-248
Metric
Powerful, small deviceTT-248
Moulds up to 600 kg
Summary
- Maximum temperature 200°C
- Medium oil
- Heating capacity 8 kW
- Cooling capacity 20 kW @ 200°C
- Cooling system indirect
- Pump capacity with axial face sealed 100 l/min; max. 5.5 bar
- With magnetic drive 100 l/min; max. 5.5 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C to or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Pressure display
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- High temperature pump with mechanical seal
- Hot oil circuit with bypass which ensures the internal oil circulation when the valves are closed
- Limescale free heat exchanger
- No cracking of the oil thanks to special heating construction
- Expansion tank with drip pan
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-248 | ||||
|---|---|---|---|---|---|
| Temperature range | °C | 200 | |||
| Heat transfer medium | oil | ||||
| Filling amount | l | 8 | |||
| Expansion volume | l | 6 | |||
| Heating capacity | kW | 8 | |||
| Cooling system | indirect | ||||
| Tubular heat exchanger | kW | 20 | |||
| Plate heat exchanger | kW | ||||
| At flow temperature | °C | 200 | |||
| Pump | |||||
| Motor | kW | 1.8 | |||
| Pump system see diagram | |||||
| Typ Z: axial face sealed 100 l/min; max. 5.5 bar | ⚫ | ||||
| Typ A: magnetic drive 100 l/min; max. 5.5 bar | |||||
| Typ X: 260 l/min; max. 4.0 bar | |||||
| Typ Y: 200-500 l/min; max. 4.0 bar | |||||
| Suction capacity vakuum | mWS | 8 | |||
| Controller | MP-888 | ||||
| Measurement sensor | FeKo Typ J | ||||
| Connections | |||||
| Medium | 3/4" BS | ||||
| Cooling water outlet | 1/2" BS | ||||
| Cooling water inlet | 1/2" BS | ||||
| Water-glycol | - | ||||
| Compressed air min. | bar | - | |||
| Dimensions incl. castors, LxWxH | mm | 880x360x920 | |||
| Weight empty approx. | kg | 120 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Mould drain | ⚫ | ||||
| Temperature regulation at the consumer | ⚫ | ||||
| Interface controller | - | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
| Pressure regulation | - | ||||
| Double circuit version | - | ||||
Imperial
Powerful, small deviceTT-248
Moulds up to 1‘322 lbs
Summary
- Maximum temperature 392°F
- Medium oil
- Heating capacity 27‘297 BTU/hr
- Cooling capacity 20 kW @ 392°F
- Cooling system indirect
- Pump capacity with axial face sealed 26.4 gpm; max. 80 psi
- With magnetic drive 26.4 gpm; max. 80 psi
Functions
- Self-optimizing temperature controller with temperature display
1/10°F – steps - Display in °C to or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Pressure display
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- High temperature pump with mechanical seal
- Hot oil circuit with bypass which ensures the internal oil circulation when the valves are closed
- Limescale free heat exchanger
- No cracking of the oil thanks to special heating construction
- Expansion tank with drip pan
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-248 | ||||
|---|---|---|---|---|---|
| Temperature range | °F | 392 | |||
| Heat transfer medium | oil | ||||
| Filling amount | US gal | 2.1 | |||
| Expansion volume | US gal | 1.6 | |||
| Heating capacity | BTU/hr | 27'297 | |||
| Cooling system | indirect | ||||
| Tubular heat exchanger | kW | 20 | |||
| Plate heat exchanger | kW | ||||
| At flow temperature | °F | 392 | |||
| Pump | |||||
| Motor | HP | 2.4 | |||
| Pump system see diagram | |||||
| Typ Z: axial face sealed 26.4 gpm; max. 80 psi | ⚫ | ||||
| Typ A: magnetic drive 26.4 gpm; max. 80 psi | |||||
| Typ X: 69 gpm; max. 58 psi | |||||
| Typ Y: 53-132 gpm; max. 58 psi | |||||
| Suction capacity vakuum | inHg | 23.17 | |||
| Controller | MP-888 | ||||
| Measurement sensor | FeKo Typ J | ||||
| Connections | |||||
| Medium | 3/4" NPT | ||||
| Cooling water outlet | 1/2" NPT | ||||
| Cooling water inlet | 1/2" NPT | ||||
| Water-glycol | - | ||||
| Compressed air min. | psi | - | |||
| Dimensions incl. castors, LxWxH | inch | 34.6x14.2x36.2 | |||
| Weight empty approx. | lbs | 265 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | |||||
| Leakstopper device | ⚫ | ||||
| Mould drain | ⚫ | ||||
| Temperature regulation at the consumer | ⚫ | ||||
| Interface controller | - | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
| Pressure regulation | - | ||||
| Double circuit version | - | ||||