- |
- Products
- |
- Water Temperature Control Units
- |
- TT-108 K
Metric
Direct cooled device with high flow rate and return volumeTT-108 K
Moulds, plates
Eckdaten
- Maximum temperature 90°C
- Medium water
- Heating capaity 18 kW I 27 kW I 36 kW I 45 kW
- Cooling capacity 260 kW @ 90°C
- Cooling system direct
- Pump capacity 200 l/min; max. 4.3 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C to or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Heaters with cascade connection (only 27 kW / 36 kW / 45 kW)
- Pressure display
- Automatic or manual refill
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- Submersible sealless pump made from bronze
- Powerful direct cooling
- Corrosion resistant device for a long service life
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
Cooling capacity
Pump capacity
| Product | TT-108 K | ||||
|---|---|---|---|---|---|
| Temperature range | °C | 90 | |||
| Heat transfer medium | water | ||||
| Filling amount max. | l | 40 | |||
| Heating capacity | kW | 18 I 27 I 36 I 45 | |||
| Cooling system | direct | ||||
| tubular heat exchanger | kW | ||||
| Plate heat exchanger | kW | ||||
| Direct | kW | 260 | |||
| At flow temperature | °C | 90 | |||
| Pump system see diagram | |||||
| Typ L: 19 l/min; max. 2.9 bar; motor 0.27 kW | |||||
| Typ E: 60 l/min; max. 4.0 bar; motor 0.75 kW | |||||
| Typ H: 60 l/min; max. 7.0 bar; motor 1.50 kW | |||||
| Typ K: 200 l/min; max. 4.3 bar; motor 2.2 kW | ⚫ | ||||
| Typ W: 250-350 l/min; max. 4.5 bar; motor 4.0 kW | |||||
| Typ V: 580 l/min; max. 4.1 bar; motor 7.5 kW | |||||
| Suction capacity vakuum | mWS | 8 | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | 1" BS | ||||
| Cooling water | Inlet 1/2" BS Outlet 1 1/2" BS | ||||
| Compressed air | - | ||||
| Dimensions incl. castors, LxWxH | mm | 1250x480x1400 | |||
| Weight empty approx. | kg | 160 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Mould drain | ⚫ | ||||
| Temperature control at the consumer | ⚫ | ||||
| Time limited water refill | - | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
| Pressure regulation | - | ||||
Imperial
Direct cooled device with high flow rate and return volumeTT-108 K
Moulds, plates
Eckdaten
- Maximum temperature 194°F
- Medium water
- Heating capaity 61‘419 BTU/hr I 92‘128 BTU/hr I 122‘837 BTU/ hr I 153‘546 BTU/hr
- Cooling capacity 260 kW @ 194°F
- Cooling system direct
- Pump capacity 52.8 gpm; max. 62 psi
Functions
- Self-optimizing temperature controller with temperature display
1/10°F – steps - Display in °C to or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Heaters with cascade connection (only 27 kW / 36 kW / 45 kW)
- Pressure display
- Automatic or manual refill
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- Submersible sealless pump made from bronze
- Powerful direct cooling
- Corrosion resistant device for a long service life
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
Cooling capacity
Pump capacity
| Product | TT-108 K | ||||
|---|---|---|---|---|---|
| Temperature range | °F | 194 | |||
| Heat transfer medium | water | ||||
| Filling amount max. | gal. | 10.5 | |||
| Heating capacity | BTU/hr | 61'419 I 92'128 I 122'837 I 153'546 | |||
| Cooling system | direct | ||||
| tubular heat exchanger | kW | ||||
| Plate heat exchanger | kW | ||||
| Direct | kW | 260 | |||
| At flow temperature | °F | 194 | |||
| Pump system see diagram | |||||
| Typ L: 5 gpm; max. 42 psi; motor 0.36 HP | |||||
| Typ E: 16 gpm; max. 58 psi; motor 1 HP | |||||
| Typ H: 16 gpm; max. 102 psi; motor 2 HP | |||||
| Typ K: 53 gpm; max. 62 psi; motor 3 HP | ⚫ | ||||
| Typ W: 66-93 pgm; max. 65 psi; motor 5.4 HP | |||||
| Typ V: 153 gpm; max. 59 psi; motor 10 HP | |||||
| Suction capacity vakuum | inHg | 23.17 | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | 1" NPT | ||||
| Cooling water | Inlet 1/2" NPTOutlet 1 1/2" NPT | ||||
| Compressed air | - | ||||
| Dimensions incl. castors, LxWxH | inch | 49.2x18.9x55.1 | |||
| Weight empty approx. | lbs | 353 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Mould drain | ⚫ | ||||
| Temperature control at the consumer | ⚫ | ||||
| Time limited water refill | - | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
| Pressure regulation | - | ||||