- |
- Products
- |
- Pressurised Water Control Units
- |
- TT-138 N
Metric
Powerful device with high functionalityTT-138 N
Moulds, double-walled vessels, small rollers
Summary
- Maximum temperature 140°C
- Medium water
- Heating capacity
18 kW I 24 kW - Cooling system indirect / direct
- 85 kW @ 160°C indirect
- 60 kW @ 60°C direct
- Pump capacity 110 l/min; max. 5.0 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C to or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Heaters with cascade connection
- Display of system and flow pressure
- Automatic water filling
- Automatic mould drainage with compressed air
- Automatic air venting
- Pressure relief
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- Proven pump with mechanical seal or magnetic coupling
- With two cooling systems: indirect and direct cooling
- Limescale free heat exchanger
- Corrosion resistant device for a long service life
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-138 N | ||||
|---|---|---|---|---|---|
| Temperature range | °C | 140 | |||
| Heat transfer medium | water | ||||
| Heating capacity | kW | 18 I 24 | |||
| Cooling system | indirect + direct | ||||
| Tubular heat exchanger | kW | 70 @ 140 °C | |||
| Plate heat exchanger | kW | ||||
| Direct | kW | 60 @ 60 °C | |||
| Pump system see diagram | |||||
| Typ N: 110 l/min; max 5.0 bar; motor 1.8 kW | ⚫ | ||||
| Typ B: 75 l/min; max 6.5 bar; motor 1.8 kW | |||||
| Typ P: 36 l/min; max 5.0 bar; motor 1.1 kW | |||||
| Typ W: 250 l/min; max 4.5 bar; motor 4.5 kW | |||||
| With booster pump | - | ||||
| Suction capacity vakuum | mWS | 8 | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | 3/4" BS | ||||
| Cooling water | 1" BS | ||||
| Compressed air | 1/4" BS | ||||
| Dimensions incl. castors, LxWxH | mm | 1240x480x1400 | |||
| Weight empty approx. | kg | 180 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Presure relief | ⚫ | ||||
| Mould drain by comporessed air | ⚫ | ||||
| Temperature control at the consumer | ⚫ | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
Imperial
Powerful device with high functionalityTT-138 N
Moulds, double-walled vessels, small rollers
Summary
- Maximum temperature 284°F
- Medium water
- Heating capacity
61‘419 BTU/hr I 81‘891 BTU/hr - Cooling system indirect / direct
- 85 kW @ 320°F indirect
- 60 kW @ 140°F direct
- Pump capacity 29 gpm; max. 73 psi
Functions
- Self-optimizing temperature controller with temperature display
1/10°F – steps - Display in °C to or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Heaters with cascade connection
- Display of system and flow pressure
- Automatic water filling
- Automatic mould drainage with compressed air
- Automatic air venting
- Pressure relief
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- Proven pump with mechanical seal or magnetic coupling
- With two cooling systems: indirect and direct cooling
- Limescale free heat exchanger
- Corrosion resistant device for a long service life
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-138 N | ||||
|---|---|---|---|---|---|
| Temperature range | °F | 284 | |||
| Heat transfer medium | water | ||||
| Heating capacity | BTU/hr | 61'419 I 81'891 | |||
| Cooling system | indirect + direct | ||||
| Tubular heat exchanger | kW | 70 @ 284 °F | |||
| Plate heat exchanger | kW | ||||
| Direct | kW | 60 @ 140 °F | |||
| Pump system see diagram | |||||
| Typ N: 29 gpm; max 73 psi; motor 2.4 HP | ⚫ | ||||
| Typ B: 20 gpm; max 94 psi; motor 2.4 HP | |||||
| Typ P: 9.5 gpm; max 73 psi; motor 1.5 HP | |||||
| Typ W: 66 gpm; max 65 psi; motor 5.4 | |||||
| With booster pump | - | ||||
| Suction capacity vakuum | inHg | 23.17 | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | 3/4" NPT | ||||
| Cooling water | 1" NPT | ||||
| Compressed air | 1/4" NPT | ||||
| Dimensions incl. castors, LxWxH | inch | 48.8x18.8x55.1 | |||
| Weight empty approx. | lbs | 397 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Presure relief | ⚫ | ||||
| Mould drain by comporessed air | ⚫ | ||||
| Temperature control at the consumer | ⚫ | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||