- |
- Products
- |
- Pressurised Water Control Units
- |
- TT-1358 W
Metric
Temperature control system with very high cooling capacityTT-1358 W
Rollers, plates, large consumers
Summary
- Maximum temperature 130°C
- Medium water
- Heating capacity 24 kW I 48 kW
- 180 kW @ 130°C indirect
- 400 kW @ 70° direct
- Cooling system indirect
- Mögliche Heizleistungs-Ausführungen 24 kW / 48 kW
- Pump capacity 250-350 l/min; max. 4.5 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C to °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Heating switchable in stages
- Heaters with cascade connection
- Display of system and flow pressure
- Automatic water filling
- Automatic air venting
- Pressure rellief
Construction
- High-performance centrifugal pump
- With two cooling systems: tubular and plate heat exchangers
- Limescale free heat exchanger
- All parts in contact with water are made of stainless steel or bronze
- Unit on adjustable feet
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-1358 W | ||||
|---|---|---|---|---|---|
| Temperature range | °C | 130 | |||
| Heat transfer medium | water | ||||
| Heating capacity | kW | 18 I 24 | |||
| Cooling system | indirect | ||||
| Tubular heat exchanger | kW | 180 @ 130°C | |||
| Plate heat exchanger | kW | 400 @ 70°C | |||
| Direct | kW | ||||
| Pump system see diagram | |||||
| Typ N: 110 l/min; max 5.0 bar; motor 1.8 kW | |||||
| Typ B: 75 l/min; max 6.5 bar; motor 1.8 kW | |||||
| Typ P: 36 l/min; max 5.0 bar; motor 1.1 kW | |||||
| Typ W: 250 l/min; max 4.5 bar; motor 4.5 kW | ⚫ | ||||
| With booster pump | - | ||||
| Suction capacity vakuum | mWS | - | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | flange DN32 | ||||
| Cooling water | 1 1/2" BS | ||||
| Compressed air | - | ||||
| Dimensions incl. castors, LxWxH | mm | 1710x790x1540 | |||
| Weight empty approx. | kg | 530 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | - | ||||
| Presure relief | ⚫ | ||||
| Mould drain by comporessed air | - | ||||
| Temperature control at the consumer | - | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
Imperial
Temperature control system with very high cooling capacityTT-1358 W
Rollers, plates, large consumers
Summary
- Maximum temperature 266°F
- Medium water
- Heating capacity 81‘891 BTU/hr I 163‘783 BTU/hr
- 180 kW @ 266°F indirect
- 400 kW @ 158°F direct
- Cooling system indirect
- Mögliche Heizleistungs-Ausführungen 24 kW / 48 kW
- Pump capacity 66 gpm; max. 65 psi
Functions
- Self-optimizing temperature controller with temperature display
1/10°F – steps - Display in °C to °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Heating switchable in stages
- Heaters with cascade connection
- Display of system and flow pressure
- Automatic water filling
- Automatic air venting
- Pressure rellief
Construction
- High-performance centrifugal pump
- With two cooling systems: tubular and plate heat exchangers
- Limescale free heat exchanger
- All parts in contact with water are made of stainless steel or bronze
- Unit on adjustable feet
Safety features
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-1358 W | ||||
|---|---|---|---|---|---|
| Temperature range | °F | 266 | |||
| Heat transfer medium | water | ||||
| Heating capacity | BTU/hr | 81'891 I 163'783 | |||
| Cooling system | indirect | ||||
| Tubular heat exchanger | kW | 180 @ 266°F | |||
| Plate heat exchanger | kW | 180 @ 158°F | |||
| Direct | kW | ||||
| Pump system see diagram | |||||
| Typ N: 29 gpm; max 73 psi; motor 2.4 HP | |||||
| Typ B: 20 gpm; max 94 psi; motor 2.4 HP | |||||
| Typ P: 9.5 gpm; max 73 psi; motor 1.5 HP | |||||
| Typ W: 66 gpm; max 65 psi; motor 5.4 HP | ⚫ | ||||
| With booster pump | - | ||||
| Suction capacity vakuum | inHg | - | |||
| Controller | MP-888 | ||||
| Measurement type | FeKo Typ J | ||||
| Connections | |||||
| Medium | flange DN32 | ||||
| Cooling water | 1 1/2" NPT | ||||
| Compressed air | - | ||||
| Dimensions incl. castors, LxWxH | inch | 67.3x31.1x60.6 | |||
| Weight empty approx. | lbs | 1169 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | - | ||||
| Presure relief | ⚫ | ||||
| Mould drain by comporessed air | - | ||||
| Temperature control at the consumer | - | ||||
| Interface controller | ◯ | ||||
| Automatic refill | ⚫ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||