- |
- Products
- |
- Oil Temperature Control Units
- |
- TT-388 32 kW
Metric
High temperature device for large consumersTT-388 32 kw
Moulds, rollers, plates
Summary
- Maximum temperature 360°C
- Medium oil
- Heating capacity 32 kW
- Cooling capacity 160 kW @ 360°C
- Cooling system indirect
- Pump capacity with axial face seal 100 l/min; max. 5.5 bar
- With magnetic drive 100 l/min; max. 5.5 bar
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Heaters with cascade connection
- Pressure display
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- High temperature pump with mechanical seal or magnetic coupling
- Hot oil circuit with bypass, which ensures the internal oil circulation when the valves are closed
- Limescale free heat exchanger
- No cracking of the oil thanks to special heating construction
- Expansion tank with drip pan
- Unit on castors
Safety features
- Level control for dry run protection
- Expansion vessel with safety shut-off in case of overflow
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-388 - 32 kW | ||||
|---|---|---|---|---|---|
| Temperature range | °C | 360 | |||
| Heat transfer medium | oil | ||||
| Filling amount | l | 27 | |||
| Expansion volume | l | 36 | |||
| Heating capacity | kW | 32 | |||
| Cooling system | indirect | ||||
| Tubular heat exchanger | kW | 160 | |||
| Plate heat exchanger | kW | ||||
| At flow temperature | °C | 360 | |||
| Pump | |||||
| Motor | kW | 1.8 | |||
| Pump system see diagram | |||||
| Typ Z: axial face sealed 100 l/min; max. 5.5 bar | ⚫ | ||||
| Typ A: magnetic drive 100 l/min; max. 5.5 bar | ◯ | ||||
| Typ X: 260 l/min; max. 4.0 bar | |||||
| Typ Y: 200-500 l/min; max. 4.0 bar | |||||
| Suction capacity vakuum | mWS | 8 | |||
| Controller | MP-888 | ||||
| Measurement sensor | FeKo Typ J | ||||
| Connections | |||||
| Medium | 3/4" BS | ||||
| Cooling water outlet | 1" BS | ||||
| Cooling water inlet | 1" BS | ||||
| Water-glycol | - | ||||
| Compressed air min. | bar | - | |||
| Dimensions incl. castors, LxWxH | mm | 1240x480x1500 | |||
| Weight empty approx. | kg | 235 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Mould drain | ⚫ | ||||
| Temperature regulation at the consumer | ⚫ | ||||
| Interface controller | ◯ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
| Pressure regulation | - | ||||
| Double circuit version | - | ||||
Imperial
High temperature device for large consumersTT-388 32 kw
Moulds, rollers, plates
Summary
- Maximum temperature 680°F
- Medium oil
- Heating capacity 109‘188 BTU/hr
- Cooling capacity 160 kW @ 680°F
- Cooling system indirect
- Pump capacity with axial face seal 26.4 gpm; max. 80 psi
- With magnetic drive 26.4 gpm; max. 80 psi
Functions
- Self-optimizing temperature controller with temperature display
1/10°F – steps - Display in °C or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Heaters with cascade connection
- Pressure display
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possible
Construction
- High temperature pump with mechanical seal or magnetic coupling
- Hot oil circuit with bypass, which ensures the internal oil circulation when the valves are closed
- Limescale free heat exchanger
- No cracking of the oil thanks to special heating construction
- Expansion tank with drip pan
- Unit on castors
Safety features
- Level control for dry run protection
- Expansion vessel with safety shut-off in case of overflow
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Cooling capacity
Pump capacity
| Product | TT-388 - 32 kW | ||||
|---|---|---|---|---|---|
| Temperature range | °F | 680 | |||
| Heat transfer medium | oil | ||||
| Filling amount | US gal | 7.1 | |||
| Expansion volume | US gal | 9.5 | |||
| Heating capacity | BTU/hr | 109'188 | |||
| Cooling system | indirect | ||||
| Tubular heat exchanger | kW | 160 | |||
| Plate heat exchanger | kW | ||||
| At flow temperature | °F | 680 | |||
| Pump | |||||
| Motor | HP | 2.4 | |||
| Pump system see diagram | |||||
| Typ Z: axial face sealed 26.4 gpm; max. 80 psi | ⚫ | ||||
| Typ A: magnetic drive 26.4 gpm; max. 80 psi | ◯ | ||||
| Typ X: 69 gpm; max. 58 psi | |||||
| Typ Y: 53-132 gpm; max. 58 psi | |||||
| Suction capacity vakuum | inHg | 23.17 | |||
| Controller | MP-888 | ||||
| Measurement sensor | FeKo Typ J | ||||
| Connections | |||||
| Medium | 3/4" NPT | ||||
| Cooling water outlet | 1" NPT | ||||
| Cooling water inlet | 1" NPT | ||||
| Water-glycol | - | ||||
| Compressed air min. | psi | - | |||
| Dimensions incl. castors, LxWxH | inch | 48.8x18.9x59.1 | |||
| Weight empty approx. | lbs | 518 | |||
| Colour | silvergrey RAL 7001 | ||||
| Functions | ● standard/ ○ optional / - not possible | ||||
| Flow control | ⚫ | ||||
| Leakstopper device | ⚫ | ||||
| Mould drain | ⚫ | ||||
| Temperature regulation at the consumer | ⚫ | ||||
| Interface controller | ◯ | ||||
| Level control | ⚫ | ||||
| Visual fault indications | ⚫ | ||||
| Acoustic warning | ⚫ | ||||
| Pressure regulation | - | ||||
| Double circuit version | - | ||||